Product Description
. Introduction:
SFJ-400 Versatile sand-milling dispersing-agitator (Frequency Control) is a new product designed by our company
.
It concentrates sand-milling
,
dispersion and agitation versatile equipments functions on this new products, it is ideal for chemical industry's laboratory. It adopts motor of frequency control, heating is lower, there is no need for carbon brush; Frequency converter adopts multiloop frequency-changer speed button, direct digits display axis revolution, it is easy to operate; it is equipped with sand-milling disc
,
dispersing blade and agitating blade
.
It can fit different testing need of laboratory.
. Main Technical Parameters:
Power of frequency converter: 550w
Range of speed regulation: 0-7500r/min
Distance of travel up & down: 200mm
Overall dimension: 450×420×550 (length by width by height)
Electrical Power Source: 220V 50Hz
Weight: 33kg
. Usage and Maintenance:
1. Tighten up selective sand-milling disc or dispersing blade with the stirring axis.
2. Loosen the locking handle, adjust the distance between disc and the bottom of container (stopper ring can be used for fixing), lifting axis up is convenient for charging and setting a container.
4. Lower the stirring axis to the proper position, cover the container cover, tighten the locking handle.
5. Make sure that the disc doesn't touch the container, then starting stirring. See section "Instructions of operational panel of frequency converter" for operation of frequency converter.
6. After finishing stirring, first lower speed, then push stop button.
7. The machine including disc and container should be cleaned after finishing stirring, maintenance work should be done timely.
8. The machine is used for chemical material process, safety and health protective step must be set up in accordance with all local codes and ordinances. Before using this machine, safety problem associated with chemical material must be established by user, not belonging to explanation of this Instruction Manual.